EWH's BMET Library

X-Ray Routine maintenance modules

Show simple item record

dc.contributor.author McClelland, Ian
dc.date.accessioned 2018-10-02T18:48:24Z
dc.date.available 2018-10-02T18:48:24Z
dc.date.issued 2004
dc.identifier.uri http://hdl.handle.net/20.500.12091/433
dc.description.abstract Routine maintenance is a procedure to ensure equip- ment is kept in good condition, and provide a long operating life. Routine maintenance may also discover potential problems, which could cause equipment failure. Potential problems can then be corrected, with a minimum of down time. ‘Quality control’ procedures, to ensure correct operation and calibration, are also a part of routine maintenance. Carrying out routine maintenance produces good knowledge of the equipment, and in case of a problem, this knowledge will help to locate the cause. Where there is a more serious problem, accurate reporting for assistance will allow faster and more economic response. For example, the service engineer can then arrive with suitable parts and test equipment. A major part of routine maintenance is just inspec- tion of equipment.This should be done as if seeing the equipment for the first time. At the same time, make note of less understood operation areas, and refer to the operation manual for explanation. en_US
dc.language.iso en_US en_US
dc.publisher WHO en_US
dc.subject X-Ray en_US
dc.subject UMDNS: 13267 en_US
dc.title X-Ray Routine maintenance modules en_US
dc.type Book chapter en_US

Files in this item

This item appears in the following Collection(s)

Show simple item record



My Account